IBM IBM UPS 10000XHV Introduction, Unpacking, Removing the Battery Modules, Installation

1:INSTALLATION

Introduction

The IBM® UPS 7500XHV and UPS 10000XHV models are high-performance uninterruptible power supplies, designed to pre- vent blackouts, brownouts, sags, and surges from reaching your computer and other sensitive electronic equipment. The uninter- ruptible power supply filters small utility line fluctuations and isolates your equipment from large disturbances by internally disconnecting from the utility line. The uninterruptible power supply provides continuous power from its internal battery until the utility line returns to safe levels or the battery is fully discharged.

Unpacking

Attention:

!Read the Safety Instructions in this documentation before you install the uninterruptible power supply.

!The uninterruptible power supply comes with its battery disconnected.

Note: The illustrations in this documentation might differ slightly from your hardware.

Inspect the uninterruptible power supply upon receipt. Accidents and damage can occur during shipment. Notify the carrier and your IBM marketing representative or authorized reseller if there is damage.

The packaging is recyclable; save it for reuse or dispose of it properly. Check the package contents:

"Uninterruptible power supply

"Two front bezels

"Rail kit

"Tower conversion kit

"Accessory kit containing:

"	Quick Installation Guide	"	Rack-mounting brackets
"	Documentation CD	"	Temperature probe
"	PowerChute® Business Edition CD	"	Serial communication cable – 4.6 m (15 ft)
"	Network Management Card CD	"	Serial to USB adapter cable – 2 m (6.5 ft)
"	Warranty Flyer	"	Four output power cables – 2 m (6.5 ft)

You will need the following tools to install the uninterruptible power supply:

"Utility knife or scissors

"Two Philips screwdrivers (#1 and #2)

"Two wrenches (7/16” and 1/4”)

"Cage nut insertion tool or flat-blade screwdriver (for installing cage nuts in some rack cabinets)

Removing the Battery Modules

The uninterruptible power supply is heavy. To lighten the weight of the unit, remove the battery modules.

! Remove the battery doors. " Remove all battery modules.

4