IBM P97 Adjusting the shape of the picture (GEOMETRY), Adjusting the convergence, (CONVERGENCE), TOP, RESET, RESET, Select, BOTTOM, Press the, Select To, Press the

Adjusting the shape of the picture (GEOMETRY)

The GEOMETRY settings allow you to adjust the rotation and shape of the picture.

The (rotation) setting is stored in memory for all input signals. All other settings are stored in memory for the current input signal.

1Press the button.

The menu appears on the screen.

2Press the m/M buttons to highlight GEOMETRY

and press the button.

The GEOMETRY menu appears on the screen.

3Press the m/M buttons to select the desiredadjustment item. Then press the button.

The adjustment bar appears on the screen.

4Press the </, buttons to make the adjustment.Select To

rotate the picture

expand or contract the picture sides

shift the picture sides to the left or right

adjust the picture width at the top of the screen

shift the picture to the left or right at the top of the screen

0reset all the GEOMETRY adjustments to the

RESET factory setting levels. Select OK.

For more information about using the RESET mode, see “Resetting the adjustments (RESET)” on page 12.

Adjusting the convergence

(CONVERGENCE)

The CONVERGENCE settings allow you to adjust the quality of the picture by controlling the convergence. The convergence refers to the alignment of the red, green, and blue color signals. If you see red or blue shadows around letters or lines, adjust the convergence.

These settings are stored in memory for all input signals.

1Press the button.

The menu appears on the screen.

2Press the m/M buttons to highlight CONVERGENCE and press the button.

The CONVERGENCE menu appears on the screen.

3Press the m/M buttons to select the desired

adjustment item. Then press the button.

The adjustment bar appears on the screen.

4Press the </, buttons to make the adjustment.

Select		To
		horizontally shift red or blue shadows
			US
		vertically shift red or blue shadows
	T	vertically shift red or blue shadows at the top of
		the screen
TOP
	B	vertically shift red or blue shadows at the bottom
		of the screen
BOTTOM

0reset all the CONVERGENCE adjustments to

RESET the factory setting levels. Select OK.

For more information about using the RESET mode, see “Resetting the adjustments (RESET)” on page 12.

9