If OUT OF SCAN RANGE appears on line 1
This indicates that the input signal is not supported by the monitor’s specifications.
12
|
|
|
|
|
|
|
|
|
|
|
| I NFORMAT I ON |
|
| |||||
|
| MONI TOR | I S | WORK I NG |
|
|
| ||
|
| I NPUT | : | 2 0 0 . 0 k H z / 85Hz |
| W | |||
|
| OUT OF | SCAN RANGE |
|
|
|
| ||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| R |
|
| CHANGE | S I GNAL T I M I NG |
|
| G | |||
|
|
|
|
|
|
|
|
| B |
3
2The frequencies of the current input signal
If the monitor recognizes the frequencies of the current input signal, the horizontal and vertical frequencies are also displayed.
3The remedies
CHANGE SIGNAL TIMING appears on the screen. If you are replacing an old monitor with this monitor, reconnect the old monitor. Then adjust the computer’s graphics board so that the horizontal frequency is between 30 – 107 kHz, and the vertical frequency is between 48 – 170 Hz.
For more information, see “Trouble symptoms and remedies” on | US |
Displaying this monitor’s name, serial number, and date of manufacture
While the monitor is receiving a video signal, press and hold the button for more than 5 seconds to display this monitor’s information box.
Example
INFORMATION
MODEL : IBM P97 |
| |
SER NO : | W | |
MANUFACTURED : | R | |
G | ||
| ||
| B |
If the problem persists, call your authorized technical support and give the following information.
•Model name: IBM P97
•Serial number
•Name and specifications of your computer and graphics board
14