Manuals / IBM / Computer Equipment / Network Card

IBM PCM-9575, 100/10 user manual Copyright, Acknowledgements

Models: 100/10 PCM-9575

1 162

Download 162 pages 19.87 Kb

Page 2

Copyright

This document is copyrighted, © 2002. All rights are reserved. The orig- inal manufacturer reserves the right to make improvements to the prod- ucts described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or transmit- ted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third parties that may result from such use.

Acknowledgements

Award is a trademark of Award Software International, Inc. VIA is a trademark of VIA Technologies, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows® is a registered trademark of Microsoft Corp. RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

ESS is a trademark of ESS Technology, Inc.

UMC is a trademark of United Microelectronics Corporation. SMI is a trademark of Silicon Motion, Inc.

Creative is a trademark of Creative Technology LTD.

All other product names or trademarks are properties of their respective owners.

This manual is for the PCM-9575.

1st Edition, Printed in Taiwan May, 2002

PCM-9575 User’s Manual

ii

Image 2

IBM PCM-9575, 100/10 user manual Copyright, Acknowledgements

Contents

PCM-9575 Copyright AcknowledgementsDescription Packing ListModel No. List PCM-9575 User’s Manual Contents Installation2.14.2Main power connector, +5 V, +12 V CN5 Table of Contents 4.1.16.2.1 Figure F.2 PCM-9575 Mech Drawing component side System AssignmentsFigure F.1 PCM-9575 Mechanical Drawing Figure F.3 PCM-9575 Mech Drawing solder sidePage Chapter 1 General Information General InformationCHAPTER Highly integrated multimedia SBC Chapter 1 Introduction1.1 Introduction 1.3.1 Standard EBX SBC Functions 1.2 Features1.3 Specifications 1.3.5 TV-out optional 1.3.2 VGA/LCD Interface1.3.4 Audio function Solid State Disk1.3.7 Mechanical and Environmental Power requirements Max1.3.6 PCI bus Ethernet interface TypicalPCM-9575 User’s Manual 1.4 Board layout dimensionsFigure 1.1 Board layout dimensions CHAPTER InstallationChapter 2 Installation 2.1 Jumpers Chapter 2 Installation2.2 Connectors Table 2.2 ConnectorsChapter 2 Installation Table 2.2 ConnectorsCRT display connector PCM-9575 User’s Manual 2.3 Locating jumpersFigure 2.1 Jumper locations Chapter 2 Installation 2.4 Locating ConnectorsFigure 2.2 Connectors component side 2.5 Setting Jumpers 2.6 Clear CMOS JP4 Table 2.3 CMOS clear JP42.8.1 Connecting the hard drive 2.7 Installing DIMMs2.8 IDE, CDROM hard drive connector CN14, CN16 2.10.1 Connecting the floppy drive 2.10 Floppy drive connector CN182.9 Solid State Disk 2.9.1 CompactFlash CN262.13 Power & HDD LED, Reset Button Connector CN13, CN22 2.11 Parallel port connector CN152.12 Keyboard and PS/2 mouse connector CN25 2.13.1 Power & HDD LED CN13 2.14 Power connectors CN27, CN5, FAN12.15 ATX power control connector CN3, CN23 2.13.2 Reset switch CN22to CN3 ATX features connector ATX power supply 2.16 IR connector CN242.17 Audio interfaces CN4, CN2 to main power2.17.2 CD audio input connector CN2 2.18 COM port connector CN192.17.1 Audio connector CN4 2.18.1 COM2 RS-232/422/485 setting JP62.19.2 Flat panel display connector CN11 2.19 VGA/LCD/LVDS interface connections2.19.1 CRT display connector CN8 2.19.3 Extension flat panel connector CN102.20 TV-out interface optional CN1 Table 2.4 S1 Panel Type select2.21.1 100Base-T connector CN12 2.21 Ethernet configuration2.22 Watchdog timer configuration 2.21.2 Network bootTable 2.6 Watchdog timer action JP5 2.23 USB connectors CN20, CN282.22.1 Watchdog timer action JP5 PCM-9575 User’s Manual 25 Chapter 3 Software Configuration Software ConfigurationEthernet interface configuration CHAPTERChapter 3 Software Configuration 3.1 Introduction3.2.1 Connections to Toshiba LTM10C209A 640 x 480 TFT color LCD 3.2 Connections to Three Standard LCDs27 Chapter 3 Software Configuration Table 3.1 Connections to Toshiba LTM10C209ATable 3.1 Connections to Toshiba LTM10C209A 3.2.2 Connections to Toshiba LTM15C151A 1024 x 768 TFT color LCDLTM15C151A Table 3.2 Connections to Toshiba LTM15C151ATable 3.2 Connections to Toshiba LTM15C151A 29 Chapter 3 Software Configuration3.2.3 Connections to Toshiba LTM12C275A 800 x 600 TFT color LCD Table 3.3 Connections to Toshiba LTM12C275A3.3 Ethernet software configuration Table 3.3 Connections to Toshiba LTM12C275AFor Ethernet installation, please see Chapter 31 Chapter 3 Software ConfigurationPCM-9575 User’s Manual Chapter 4 Award BIOS Setup Award BIOS SetupThis chapter describes how to set BIOS configuration data CHAPTER4.1.1 System configuration verification Chapter 4 Award BIOS Setup4.1 System test and initialization press F1 to RESUMEFigure 4.1 BIOS setup program initial screen 4.2 Award BIOS setup4.2.1 Entering setup 4.2.2 Standard CMOS Features setup Figure 4.2 CMOS Features setupChapter 4 Award BIOS Setup 4.2.3 Advanced BIOS Features setupFigure 4.3 Advanced BIOS Features setup PCM-9575 User’s Manual 4.2.4 Advanced Chipset Features setupFigure 4.4 Advanced Chipset Features setup 4.2.5 Integrated Peripherals 4.2.6 Power Management SetupFigure 4.6 Power Management Setup Figure 4.5 Integrated Peripherals4.2.8 PC Health Status 4.2.7 PnP/PCI ConfigurationsFigure 4.7 PnP/PCI Configurations Figure 4.8 PC Health StatusFigure 4.9 Frequency/Voltage Control Chapter 4 Award BIOS Setup4.2.9 Frequency/Voltage Control Figure 4.10 Load BIOS defaults screen 4.2.10 Load Optimized Defaults4.2.11 Set Password Advanced BIOS Features menu, choose theTo Disable Password 4.2.12 Save & Exit SetupTo Change Password 4.2.13 Exit Without Saving PCM-9575 User’s ManualCHAPTER PCI SVGA SetupChapter 5 PCI SVGA Setup 5.1.1 Chipset Chapter 5 PCI SVGA Setup5.1 Introduction 5.1.2 Display memoryFigure 5.1 Selecting Display Settings 5.1.4 Dual/Simultaneous Display1. The windows illustrations in this chapter are 5.2 Installation of the SVGA Driver5.2.1 Installation for Windows intended as examples only. Please follow theStep 3. Press the Have Disk button Chapter 5 PCI SVGA SetupStep 2. Choose the Adapter tab, then press the Change... button Step 5. Select the highlighted item, and click the OK button Step 4. Type in the pathD\Biscuit\9575\VGA\Win9xMe PCM-9575 User’s ManualStep 7. Press “Yes” to reboot Chapter 5 PCI SVGA Setup5.2.2 Installation for Windows 98/Me PCM-9575 User’s ManualChapter 5 PCI SVGA Setup Step 2. Select “Adapter,” then “Change.”PCM-9575 User’s Manual Step 3. Press “Next,” then “Display a list....”Step 4. Press the “Have disk...” button D\Biscuit\9575\VGA\Win9xMe Chapter 5 PCI SVGA SetupStep 5. Insert the CD into the CD-ROM drive. Type in the path Then press “OK” Step 6. Select the highlighted item, then click “OK.”Step 8. Press “Yes” to reboot PCM-9575 User’s Manualinstalled first, before you install the Windows Installation for Windows NTService Pack X X = 3, 4, 5, 6,... must be Chapter 5 PCI SVGA SetupStep 2. Choose the Settings tab, and press the Display Type button PCM-9575 User’s ManualChapter 5 PCI SVGA Setup Step 3. Press the Change... buttonPress the OK button Step 4. Click the Have Disk... button Step 5. Type the pathD\Biscuit\VGA\WinNT PCM-9575 User’s ManualStep 6. Select the highlighted item, and click the OK button Step 7. Press Yes to proceed Step 8. Press OK to rebootChapter 5 PCI SVGA Setup 5.2.4 Installation for Windows PCM-9575 User’s ManualChapter 5 PCI SVGA Setup Step 2. Choose the Video Controller VGA Compatible” buttonStep 3. Choose the Drive button, press “Update Driver...” button PCM-9575 User’s ManualStep 5. Choose “Display adapters”, press “Next” button Chapter 5 PCI SVGA SetupStep 4. Choose Display a list of... , then press “Next” button Step 6. Click the “Have Disk” button PCM-9575 User’s ManualChapter 5 PCI SVGA Setup 5.2.5 Installation for Windows XPStep 8. Press “Finish to reboot Step 2. Choose “Hardware” and “Device Manager”, press “OK” button PCM-9575 User’s ManualChapter 5 PCI SVGA Setup Step 3. Choose “Video Controller VGA Compatible, press “OK” but- tonPCM-9575 User’s Manual Step 4. Choose Driver”, “Update Driver”, press “OK” buttonStep 5. Choose “Install from a list.....” , press “Next” Step 7. Choose “Display adapters”, press “Next” button Chapter 5 PCI SVGA SetupStep 6. Choose “Don’t search. I will....”, press “Next” button Step 8. Type the path D\Biscuit\9575\VGA\WinXP then press “OK” button PCM-9575 User’s ManualChapter 5 PCI SVGA Setup 5.3 Further InformationStep 10. Press “Finish to reboot VIA websitePCM-9575 User’s Manual CHAPTER Audio SetupChapter 6 Audio Setup 6.2 DOS utilities Chapter 6 Audio Setup6.1 Introduction 6.2.1 VIA Sound Blaster Pro compatible set up programThe files on the software installation diskette 6.3 Driver installation6.2.2 VIA Sound Blaster Installation are compressed. Do not attempt to install thePCM-9575 User’s Manual 6.3.2 Windows 95/98 driversStep 2. In the Add New Hardware Wizard window, click Next Step 3. In the following Add New Hardware Wizard window, click Next for Windows to search for Plug and Play devices Step 5. In the following Add New Hardware Wizard window, select No, I want to select... and click Next Step 8. In the Install From Disk window, click Browse Chapter 6 Audio SetupStep 10. In the Install From Disk window, click OK PCM-9575 User’s ManualChapter 6 Audio Setup Step 12. In the Add New Hardware Wizard window, click NextStep 13. The Copying Files... window will appear PCM-9575 User’s Manual6.3.3 Windows NT drivers Step 3. In the Add window, select the Unlisted... item and click OK PCM-9575 User’s ManualStep 6. In the System Setting Change window, click Restart Now Chapter 6 Audio SetupPCM-9575 User’s Manual 6.3.4 Windows 2000 DriversStep 2. Choose “Multimedia Audio Controller” button Step 4. Choose “Sound, video and game controllers”, press “Next” Step 3. Choose “Driver button, press “Update Driver” buttonChapter 6 Audio Setup PCM-9575 User’s Manual Step 5. Click the “Have Disk...” buttonStep 7. Click “Have Disk” button Step 8. Press “Next” button Step 9. Press “Finish” to reboot Chapter 6 Audio SetupPCM-9575 User’s Manual 93 Chapter 7 PCI Bus Ethernet Interface PCI Bus Ethernet InterfaceCHAPTER 7.1 Introduction 7.2 Installation of Ethernet driverChapter 7 PCI Bus Ethernet Interface 7.2.1 Installation for MS-DOS and Windows95 Chapter 7 PCI Bus Ethernet Interface 7.2.2 Installation for WindowsStep 2. a. Click Add and prepare to install network functions PCM-9575 User’s Manual Step 4. a. Click Have Disk to install the driverStep 3. a. Select the Adapter item to add the Ethernet card b. Click OK 97 Chapter 7 PCI Bus Ethernet InterfacePCM-9575 User’s Manual 7.2.3 Installation for WindowsStep 1. Open Device Manager Step 99 Chapter 7 PCI Bus Ethernet InterfaceStep Step PCM-9575 User’s ManualStep Step 101 Chapter 7 PCI Bus Ethernet InterfaceStep Step PCM-9575 User’s Manual7.2.4 Installation for Windows NT 103 Chapter 7 PCI Bus Ethernet Interfaceb. Click Next Step 3. a. Click Select from list PCM-9575 User’s ManualD\Biscuit\9575\LAN\8139C\winnt4 c. Click OK Step 4. Click “Have Disk.”Step 5. a. Insert the Utility CD ROM b. Fill in the correct path 105 Chapter 7 PCI Bus Ethernet InterfaceStep 6. Check the highlighted item, and click “OK.” PCM-9575 User’s Manual107 Chapter 7 PCI Bus Ethernet Interface 7. Click “Next” to continue setupStep 8. Choose the networking protocols, then click Next PCM-9575 User’s Manual Step 9. Select the correct Network Services then click NextStep 10. Click “Next” to continue setup Realtek website 7.3 Further information11. Click “Next” to start the network Intel websitePCM-9575 User’s Manual Appx.A Programming the Watchdog TimerAppendix Appendix A Programming the Watchdog Timer A.1 Supported Input Timing Modes2090 RETURN 80 END1070 RETURN Appx.ATPC-642 User’s Manual Appx.B Installing PC/104-Plus ModulesAppendix Appendix B Installing PC/104-Plus Modules B.1 Installing PC/104-Plus ModulesFigure B.1 PC/104+ module mounting diagram Appx.BFigure B.2 PC/104+ module dimensions mm ±0.1 TPC-642 User’s ManualPin Assignments AppendixAppendix C Pin Assignments C.1 CPU Fan Power Connector FANC.2 Ethernet 10/100Base-T Connector CN12 Table C.1 IR connector FANTable C.3 Audio connector CN4 C.3 Audio Connector CN4C.4 Audio In Connector CN2 Table C.4 Audio line-in connector CN2Pin Signal C.5 Main Power Connector CN5Table C.5 Main Power Connector CN5 PCA-6183 User’s ManualPin Signal C.6 Keyboard and PS/2 Mouse Connector CN25Table C.6 Keyboard and mouse connector CN25 Appx.CPCA-6183 User’s Manual C.7 Floppy Disk Drive Connector CN18Table C.7 Floppy Disk Drive Connector CN18 Appx.C C.8 PC/104 plus Connectors CN17Table C.8 PC/104+ connectors CN17 Table C.8 PC/104+ connectors CN17 PCA-6183 User’s ManualAppx.C C.9 IDE Hard Drive Connector CN14, CN16Table C.9 IDE HDD connector CN14, CN16 PCA-6183 User’s Manual C.10 Parallel Port Connector CN15Table C.10 Parallel Port Connector CN15 Table C.11 Power & HDD LED Connector CN13 C.11 Power & HDD LED ConnectorCN13C.12 Reset Button Connector CN22 Table C.12 Reset Button Connector CN22Table C.13 USB Connector CN20, CN28 C.13 USB Connector CN20, CN28C.14 LCD Inverter Backlight Connector CN6 Table C.14 LCD Inverter Backlight Connector CN6Table C.15 IR Connector CN24 C.15 IR Connector CN24C.16 CRT Display Connector CN8 Table C.16 CRT Display Connector CN8Pin Signal C.17 TV video Out Connector CN1Table C.17 TV video Out Connector CN1 PCA-6183 User’s ManualThe model number of the CN11 socket is C.18 Flat Panel Connector CN11Table C.18 Flat Panel Connector CN11 Appx.CThe model number of the CN10 socket is C.19 Extended Flat Panel Display Connector CN10Table C.19 Extended Flat Panel Display Connector CN10 PCA-6183 User’s ManualAppx.C C.20 LCD Signal MappingTable C.20 LCD Signal Mapping 16-bitTable C.21 LVDS Connector CN9 C.21 LVDS Connector CN9C.22 Peripheral Power Connector CN27 Table C.22 Peripheral Power Connector CN27Appx.C C.23 COM Port Connector CN19Table C.23 COM Port Connector CN19 PCA-6183 User’s Manual C.24 CompactFlash Card Connector CN26Table C.24 CompactFlash Card Connector CN26 Pin Signal C.25 ATX Power Feature Connector CN3Table C.25 ATX Power Feature Connector CN3 Appx.CPCA-6183 User’s Manual Appx.D System AssignmentsAppendix Table D.1 System I/O ports Appendix D System AssignmentsD.1 System I/O Ports PCA-6183 User’s ManualTable D.2 1st MB memory map D.2 1st MB memory mapD.3 DMA channel assignments Table D.3 DMA channel assignmentsPCA-6183 User’s Manual D.4 Interrupt assignmentsTable D.4 Interrupt assignments Appx.E Optional Extras for the PCM-9575Appendix E.1 PCM-10586-5A00 cable kit for PCM-9575 PCM-9575 User’s ManualE.3 Optional USB cable CN20 E.4 ATX Power Control Cable CN3E.2 Optional LCD cables 10.4 TFT LCD panel CN14 E.5 Optional PC/104+ to PCI ModulePCM-9575 User’s Manual Appx.F Mechanical DrawingsAppendix F.1 Mechanical Drawings PCM-9575 User’s ManualFigure F.2 PCM-9575 Mechanical Drawing component side Appx.FFigure F.3 PCM-9575 Mechanical Drawing solder side PCM-9575 User’s Manual