IBM PCM-9575 Appendix B Installing PC/104-Plus Modules, B.1 Installing PC/104-Plus Modules

Appendix B Installing PC/104-Plus Modules

B.1 Installing PC/104-Plus Modules

The PCM-9575's PC/104 connectors give you the flexibility to attach PC/ 104+ modules.

Installing these modules on the PCM-9575 is quick and simple. The fol- lowing steps show to mount the PC/104+ modules:

1.Remove the PCM-9575 from your system, paying particular atten- tion to the safety instructions already mentioned above.

2.Make any jumper or link changes required to the CPU card now. Once the PC/104+ module is mounted, you may have difficulty in accessing these.

3.Normal PC/104+ modules have male connectors and mount directly onto the main card. (Refer to the diagram on the following page.)

4.Mount the PC/104+ module onto the CPU card by pressing the module firmly but carefully onto the mounting connectors.

5.Secure the PC/104+ module onto the CPU card using the four mounting spacers and screws.

TPC-642 User’s Manual 116