7. Store the crank inside the rear of the rack near the bottom of the right wall.
Notes:
1. If the customer does not want to connect an electrical outlet to the front mounting
plate, install the mounting plate without the electrical outlet.
2. The customer is responsible for providing and connecting the electrical outlet
assembly.
The customer is also responsible for providing and connecting the power cable from
the customer power source to the front electrical outlet.
Step 8. Attach the Rear Electrical Outlet
Attention: Refer to “Safety Notices” on page v before continuing.
Note: The customer is responsible for providing and connecting the electrical outlet
assembly.
The customer is also responsible for providing and connecting the power cable
from the customer power source to the rear electrical outlet.
1. Open the rear door of the rack.
Mounting
Screws
Crank
Mounting
Plate
Front of Rack
22 S80, S85 Installation Guide