MS7308D/E Mainboard User’s Manual
Features Setup Page
This page sets some of the parameters for peripheral devices connected to the system.
AMIBIOS SETUP – FEATURES SETUP
©1998 American Megatrends, Inc. All Rights Reserved
| OnBoard FDC | Enabled |
|
|
|
|
|
| OnBoard Serial PortA | 3F8h/COM1 |
|
|
|
|
|
| OnBoard IR Port | Disabled |
|
|
|
|
|
| OnBoard Parallel Port | 378h |
|
|
|
|
|
| Parallel Port Mode | SPP |
|
|
|
|
|
| Parallel Port IRQ | 7 |
|
|
|
|
|
| Parallel Port DMA | N/A |
|
|
|
|
|
| OnBoard PCI IDE | Both |
|
|
|
|
|
| Ultra DMA Support | Disabled |
|
|
|
|
|
| OnBoard Audio/Modem | Enabled |
|
|
|
|
|
| OnBoard LAN | Enabled |
|
|
|
|
|
| USB Function | Disabled |
|
|
|
|
|
| USB Function for DOS | Disabled |
|
|
|
|
|
| ESC | : Quit | −↓←→ : Select Item |
| |||
|
|
|
| ||||
|
|
| F1 | : Help | PU/PD/+/- | : Modify |
|
|
|
| F5 | : Old Values | (Shift)F2 | : Color |
|
|
|
| F6 : Load Optimal values |
|
| ||
|
|
| F7 : Load Best performance values |
| |||
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
| |||
| OnBoard FDC | Use this item to enable or disable the onboard | |||||
|
| floppy disk drive interface. |
|
|
| ||
|
|
|
|
| |||
| OnBoard Serial | Use this item to enable or disable the onboard | |||||
| PortA | COM1 serial port, and to assign a port address | |||||
|
|
|
|
| |||
| OnBoard IR Port | Use this item to define the protocol for an |
| ||||
|
| infrared port if you have installed an optional IR | |||||
|
| port. The choices are IrDA and ASKIR. |
|
| |||
Onboard Parallel Port
Use this item to enable or disable the onboard LPT1 parallel port, and to assign a port address. The Auto setting will detect and available address.
Parallel Port Mode Use this item to set the parallel port mode. You can select SPP (Standard Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or ECP + EPP.
Parallel Port IRQ Use this item to assign either IRQ 5 or 7 to the parallel port.
Parallel Port DMA Use this item to assign a DMA channel to the parallel port. The options are 0, 1 and 3.
28
