IBM MS7308D/E, V1.6 S63X/JUNE 2000 user manual Standard CMOS Setup Page, select Floptical

3: BIOS Setup Utility

Standard CMOS Setup Page

Use this page to set basic information such as the date and time, the IDE devices, and the diskette drives. If you press the F3 key, the system will automatically detect and configure the hard disks on the IDE channels.

Date & Time	Use these items to set the system date and time
Pri Master	Use these items to configure devices connected
Pri Slave	to the Primary and Secondary IDE channels. To
Sec Master	configure an IDE hard disk drive, choose Auto. If
Sec Slave	the Auto setting fails to find a hard disk drive, set
	it to User, and then fill in the hard disk
	characteristics (Size, Cyls, etc.) manually. If you
	have a CD-ROM drive, select the setting
	CDROM. If you have an ATAPI device with
	removable media (e.g. a ZIP drive or an LS-120)
	select Floptical.
Floppy Drive A	Use these items to set the size and capacity of
Floppy Drive B	the floppy diskette drive(s) installed in the
	system.

21