3: BIOS Setup Utility
Floppy Drive If you enable this item, your system will check all
Seekfloppy disk drives at start up. Disable this item unless you are using an old 360KB drive.
PS/2 Mouse If this item is set to Enabled, the onboard PS/2
SupportMouse port will work. Setting this to Disable turns off the port.
Password Check If you have entered a password for the system, use this item to determine if the password is required to enter the Setup Utility (Setup) or required both at
Boot to OS/2 > Enable this item if you are booting the OS/2
64MBoperating system and you have more than 64MB of system memory installed.
Internal Cache Leave this item enabled since all the processors that can be installed on this board have internal cache memory.
System BIOS If you enable this item, a segment of the system
Cacheable BIOS will be cached to main memory for faster execution.
CAS Latency This item determines the operation of the SDRAM memory CAS (column address strobe). We recommend that you leave this item at the default value. The 2T setting requires faster memory that specifically supports this mode.
23