IBM YY-R5xx, YY-W2xx manual PCI Add-on Card Installation, CDROM/HDD Installation

3.3 PCI Add-on Card Installation

Remove the tail gate bracket, install PCI card into motherboard, and screw in bracket to rear window of chassis.

The chassis could be optional required A Card Clamp Holder which is used to clamp the Add-on Card for avoiding any popping issue.

To remove The Clamp Holder first, install Add-on Cards as usual; adjust the holder's height for clamping well the Add-on Cards.

3.4 CDROM/HDD Installation -

YY-W2 Server Chassis is designed to install drive peripherals by rails, it allow integrator to pre-assembly peripherals for fasten system assembly as module feed in.

7

ZZ17-W2001-B