3.6 Instructions for Switches and LED Indicators on front panel
The switches and led indicators on front panel have the functions as
following:
POWER SW: Push Switch, The system power on/off, connects to M/B.
Reset SW: Push switch, connect to M/B
ξ POWR LED: The system power LED (green), connect to M/B.
ξ 
POWER FAILURE LED: Reserved and optional requested, it may connected with the Power TTL signal wire supplied by PSU RED: The power module is in abnormal operation
FAN ALARML LED: Reserved, it may connect with optional control board or M/B.
RED: Fan is in abnormal Operation
LAN LED: GREEN - Linked
GREEN Flash - Active
HDD LED: ORANGE FLASH:
USB PORT (Cable is optional attached to kits box)
Security Lock: The front door is lockable.
10
