
Control elements and indicators | Starting up and operation |
5.1.1.4Indicators on the hot-plug HDD modules
Figure 14: Indicators on a hot-plug HDD module
1HDD BUSY (green)
–Lights up: HDD in active phase (drive active, drive being accessed)
–Does not light: HDD inactive (drive inactive)
2HDD FAULT (orange)
–Does not light: no HDD error
–Lights up: HDD Faulty or Rebuild Stopped (drive defective/needs replacing, a rebuild process was stopped or the HDD module is not correctly inserted)
–Slow flashing: HDD Rebuild (the data is being restored after changing a drive)
If a hard disk drive continuously indicates an error, the drive should be replaced as soon as possible. This can be done during operation (see
68 | Operating Manual | RX600 S5 |