Hardware installation | Notes on connecting/disconnecting cables |
4.5Notes on connecting/disconnecting cables
VCAUTION!
Always read the documentation supplied with the device you wish to connect.
Never connect, or disconnect cables during a thunderstorm.
Never pull on a cable when disconnecting it. Always take hold of the cable by the plug.
Follow the sequence described below to connect or disconnect external devices to or from the server:
Be sure to wait for 10 seconds or more after shutdown before turning the server on.
Connecting cables
ÊTurn off all power and equipment switches.
ÊDisconnect all power plugs from the properly grounded power outlets.
ÊConnect all cables to the server and peripherals.
ÊPlug all data communication cables into the utility sockets.
ÊPlug all power cords into the properly grounded power outlets.
Disconnecting cables
ÊTurn off all power and equipment switches.
ÊDisconnect all power plugs from the properly grounded power outlets.
ÊUnplug all data communication cables from the utility sockets.
ÊDisconnect the relevant cables from the server and all the peripherals.
IFor connecting or disconnecting LAN cables, the server need not to be powered off. To avoid loss of data teaming function has to be enabled.
RX600 S5 | Operating Manual | 61 |
