CSS components

Hot-plug components

ÊTake the retaining plate out and put it aside.

IKeep the retaining plate for future use.

ÊPush the engaging hooks down until they disengage from the removal tool (see figure 30 on page 111), and keep them in a safe place.

8.1.4.4Installing a hot-plug expansion card

Inserting an expansion card in the removal tool

Figure 32: Inserting the new expansion card in the removal tool

ÊInsert the new expansion card in the provided slot (see oval in figure above) of the removal tool.

ÊInsert the green engaging hooks (see circles in figure 32 on page 113) in the rods and push them down until they engage in the upper edge of the expansion card.

VCAUTION!

Make sure that e.g. the ports on the expansion card are not blocked by the engaging hooks.

RX600 S5

Operating Manual

113

Page 113
Image 113
Fujitsu RX600 S5 manual Operating Manual 113