Fujitsu RX600 S5 Installing SFP+ transceiver modules, Removing the protective optical port plug

CSS components Non-hot-plug components

8.2.3.2Installing SFP+ transceiver modules

Figure 45: Removing the protective optical port plug

ÊRemove the SFP+ transceiver module from its protective packaging.

ÊRemove the optical port plug from the new / additional SFP+ transceiver module.

VCAUTION!

–Always keep the protective port plugs attached to the transceiver optical bores and fiber-optic cable connectors until you are ready to make a connection.

–Save the protective port plug for future use.

RX600 S5 Operating Manual 129