Important information

Safety instructions

Do not contaminate the CD/DVD/BD surface with fingerprints, oil, dust, etc. If dirty, clean with a soft, dry cloth, wiping from the center to the edge. Do not use benzene, thinners, water, record sprays, antistatic agents, or silicone-impregnated cloth.

Be careful not to damage the CD/DVD/BD surface.

Keep the CDs/DVDs/BDs away from heat sources.

Do not bend or place heavy objects on CDs/DVDs/BDs.

Do not write with ballpoint pen or pencil on the label (printed) side.

Do not attach stickers or similar to the label side. Doing so may cause rotational eccentricity and abnormal vibrations.

When a CD/DVD/BD is moved from a cold place to a warm place, moisture condensation on the CD/DVD/BD surface can cause data read errors. In this case, wipe the CD/DVD/BD with a soft, dry cloth then let it air dry. Do not dry the CD/DVD/BD using devices such as a hair dryer.

To avoid dust, damage, and deformation, keep the CD/DVD/BD in its case whenever it is not in use.

Do not store CDs/DVDs/BDs at high temperatures. Areas exposed to prolonged direct sunlight or near heating appliances are to be avoided.

IYou can prevent damage from the optical drive and the CDs/DVDs/BDs, as well as premature wear of the disks, by observing the following suggestions:

Only insert disks in the drive when needed and remove them after use.

Store the disks in suitable sleeves.

Protect the disks from exposure to heat and direct sunlight.

Laser information

The optical drive complies with IEC 60825-1 laser class 1.

VCAUTION!

The optical drive contains a light-emitting diode (LED), which under certain circumstances produces a laser beam stronger than laser class 1. Looking directly at this beam is dangerous.

Never remove parts of the optical drive casing!

RX600 S5

Operating Manual

33

Page 33
Image 33
Fujitsu RX600 S5 manual Laser information, Never remove parts of the optical drive casing