Fujitsu RX600 S5 manual Installing a non-hot-plug expansion card

CSS components Non-hot-plug components

8.2.2.2Installing a non-hot-plug expansion card

Figure 41: Inserting the new expansion card in the removal tool

ÊInsert the new expansion card in the provided slot (see oval in figure above) of the removal tool.

ÊInsert the green engaging hooks (see circles in figure above) in the rods and push them down until they engage in the upper edge of the expansion card.

VCAUTION!

Make sure that the ports on the expansion card are not blocked by the engaging hooks.

ÊInsert the expansion card fastened to the removal tool in the PCI slot.

ÊClose the slot lock (see figure 28 on page 109) by folding it down. Make sure that the slot lock engages.

ÊIf necessary, connect the cables on the expansion card.

ÊClose the server (see "Opening/Closing the server" on page 134).

RX600 S5 Operating Manual 125