Safety instructions

Important information

VCAUTION!

Proper operation of the system (in accordance with IEC 60950-1/2 resp. EN 60950-1/2) is only ensured if the casing is completely assembled and the rear covers for the installation slots have been fitted (electric shock, cooling, fire protection, interference suppression).

Only install system expansions that satisfy the requirements and rules governing safety and electromagnetic compatibility and those relating to telecommunication terminals. If you install other expansions, they may damage the system or violate the safety regulations. Information on which system expansions are approved for installation can be obtained from our customer service center or your sales outlet.

The components marked with a warning notice (e.g. lightning symbol) may only be opened, removed or exchanged by authorized, qualified personnel. Exception: CSS components can be replaced.

The warranty is void if the server is damaged during installation or replacement of system expansions.

Only set screen resolutions and refresh rates that are specified in the operating manual for the monitor. Otherwise, you may damage your monitor. If you are in any doubt, contact your sales outlet or customer service center.

Before installing/removing internal options to/from the server, turn off the server, all peripheral devices, and any other connected devices. Also unplug all power cords from the outlet. Failure to do so can cause electric shock.

Do not damage or modify internal cables or devices. Doing so may cause a device failure, fire, or electric shock.

Devices inside the server remain hot after shutdown. Wait for a while after shutdown before installing or removing internal options.

The circuit boards and soldered parts of internal options are exposed and can be damaged by static electricity. Before handling them, first touch a metal part of the server to discharge static electricity from your body.

Do not touch the circuitry on boards or soldered parts. Hold the metallic areas or the edges of the circuit boards.

30

Operating Manual

RX600 S5

Page 30
Image 30
Fujitsu RX600 S5 manual Safety instructions