CSS components |
Removing an expansion card from the removal tool
VCAUTION!
When removing the expansion card from the removal tool, pay particular attention to the engaging hooks that fasten the board to the removal tool (see figure 39). Do not lift them by more than approx. 1 mm, in other words only as far until the expansion card is released. Otherwise you could damage the engaging hooks.
Figure 39: Removing the expansion card from the removal tool
ÊLift the green movable engaging hooks (see arrow in figure above) no more than approximately 1 mm until the expansion card is completely released.
ÊTake the expansion card out and put it aside.
RX600 S5 | Operating Manual | 123 |
