Fujitsu RX600 S5 manual Removing/installing the dummy module

CSS components Hot-plug components

8.1.3.2Removing/installing the dummy module

Free slots are provided with dummy modules. Remove the dummy module before installing an additional HDD module.

1

1

2

Figure 24: Removing/installing the 2.5-inch dummy module

ÊPress both tabs on the dummy module together until the locking mechanism disengages (1).

ÊPull the dummy module out of the bay (2).

To install a dummy module, follow the same procedure in reverse order.

VCAUTION!

Store the dummy module in a safe place. If you have removed an HDD module and do not install a new one in its place, put the dummy module back in its place for cooling, to comply with EMC regulations (regulations regarding electromagnetic compatibility), and for protection against fire. Ensure that the dummy module engages correctly in the bay.

RX600 S5 Operating Manual 103