Fujitsu RX600 S5 manual Opening/Closing the server, Opening the server

Opening/Closing the server CSS components

8.3Opening/Closing the server

VCAUTION!

The actions described in this section may only be performed by personnel with the appropriate technical training. (The device can be seriously damaged if it is opened without authorization or if repairs are attempted by untrained personnel.)

8.3.1Opening the server

VCAUTION!

●The server can be seriously damaged if it is opened without authorization or if repairs are attempted by untrained personnel.

●It is essential to observe the safety instructions in chapter "Important information" on page 27.

●Before removing or attaching covers, turn off the server, all peripheral devices, and any other connected devices. Also unplug all power cords from the outlet. Failure to do so can cause electric shock.

●The housing cover must be replaced as soon as possible for purposes of cooling, to comply with EMC regulations (regulations regarding electromagnetic compatibility) and to prevent fires. The housing cover must not remain open for longer than 5 minutes.

●Use the anti-tilt plate to prevent the rack from tipping when installing the rack. Pulling the server out of the rack without having installed the anti-tilt plate may cause the rack to tip over.

●Be careful not to pinch fingers or clothes when sliding out the server or pushing it back. Failure to do so may cause injury.

134 Operating Manual RX600 S5