3 Hardware Installation
Slide Switch Setting
Step 1: Make sure your PC is switched off.
Step 2: Take the receiver and select channel CH1 or CH2 by using the slide switch on the side of the receiver. (Remember your selection.)
CH2
CH1
Back View of Receiver | Channel Switch of Receiver |
Step 3: Connect the receiver to your PC by plugging in the receiver’s PS/2 mouse connector into the mouse port of your PC and the PS/2 keyboard connector into the keyboard port.
Mouse Connector | Keyboard Connector |
Step 4: Take the keyboard and make sure the batteries on the back are installed correctly. (Follow the polarity signs in the battery compartment.)
Battery 1.5V 2pcs
(+) | ID Button |
| Channel Switch |
Bottom View of Keyboard
3
