ID Setting
This wireless keyboard kits contains 2 channels, and each channel contains 255 sets ID. This extra
#The word CONNECT labels the ID button on each unit.
#The LED under ID button of receiver shows connecting condition.
Step 1: Press the ID button on the top of the receiver once.
ID Button
ID Button of Receiver
Step 2: Press the ID button on the bottom of the mouse once.
CHANNEL SWITCH
ID Button of Mouse
ID BUTTON
Step 3: Press the ID button on the bottom of the keyboard once.
ID Button of Keyboard
ID Button CH2 | CH1 |
Remarks:
1.You must follow the procedure above to set the ID of receiver, mouse and keyboard. Once the receiver ID button is pressed you have 35 seconds to complete the entire process, or you will need to begin again.
2.Once the keyboard and receiver are plugged in, the yellow receiver light will flash. Once the ID is set, it will remain steadily lit.
5
