Icom DS-100 instruction manual Entry Position/Time

NOTE:

•‘nature of distress’ will be recorded for 10 min. until a distress call transmits.

•Distress call repeats every 3.5–4.5 min., until receiving an ‘ac- knowledgement’

•Beep (Pi,Pi) sounds with the max. volume every 1 sec.

•Push [DISTRESS] button to transmit a renewed distress call.

•Push [CLR] to cancel the ‘Call repeat’ mode.

The ‘cancel acknowledgement’ is automatically transmitted

CALL PROCEDURE 2

■Entry Position/Time

When no GPS receiver is connected, the ‘Entry Position/Time’ appears at the top of subject menu.

qPush [CALL], then push [√] to select ‘Entry Position/Time’. w Push [ENT], then enter the latitude data with key pad.

e Push [Y]/[Z] to select N; north latitude or S; south latitude, then push [ENT].

when the [CLR] key is pushed.

•Push [Ω]/[≈] to move the cur- sor then push [Y]/[Z] to correct the data

•Push [CLR] to Exit the menu.

•Push [A/a], the push [ENT] to enter a ‘Null data’.

rEnter the longitude data with key pad.

tPush [Y]/[Z] to select E; east longitude or W; west longitude, then push [ENT].

•Push [Ω]/[≈] to move the cur- sor then push [Y]/[Z] to correct the data

•Push [CLR] to Exit the menu.

•Push [A/a], the push [ENT] to enter a ‘Null data’.

<Input a position>

Latitude

° ’N

Longitude

° ’E

<A/a∀Null data> <CLR∀Exit / ENT∀OK>

<Input a Time>

UTC :

<A/a∀Null data> <CLR∀Exit / ENT∀OK>

5