Icom DS-100 instruction manual Distress call to ships, Individual call, Call Procedure

2 CALL PROCEDURE

yPush UTC time with keypad.

•Push [Ω]/[≈] to move the cursor then push [Y]/[Z] to correct the data

•Push [CLR] to Exit the menu.

•Push [A/a], then push [ENT] to enter ‘Null data’.

■Distress call to ships

General DSC call with the ‘distress’ category may be used for communications after the Distress call, e.g. you want to change the operating mode, frequency, etc.

■Individual call

qPush [CALL], then push [√] several times to select ‘Indi-

vidual call’ then push [ENT].

wPush [√] several times to se- lect the desired address, then push [ENT].

•Enter the 9 digit ID when ‘Man- ual entry’ is selected.

•Push [CLR] to exit the menu. e Push [CALL] and [ENT] si-

multaneously to transmit an Individual call.

r Push [CLR] to stop the call.

<Select an address ID>

≈Manual entry DS-100 SN10 DS100 SN2 DS100 SN3

<CLR∀Exit / ENT∀OK>

<Input an address>

ID:(9digit)

<CLR∀Exit / ENT∀OK>

6