Icom DS-100 Function display, Panel Description, VHF DSC CONTROLLER CH 70 WATCHING, Gps Utc

1 PANEL DESCRIPTION

must be set in advance.

NOTE: If GPS data is interrupted for 30 sec. the “GPS” indi- cation disappears. The terminal unit retains the most recent data in such cases.

-VHF DSC CONTROLLER-

CH 70 WATCHING

q	GPS: UTC	4:45		w
	Lat	45	59'N		e
	Lon	134	44'E

■Function display

q GPS INDICATOR

➥“GPS” appears while GPS receiver is connected.

➥“GPS’ disappears when no GPS receiver is connected.

➥“MNL’ appears when the time data and position data are input manually.

w TIME ZONE INDICATOR

➥“Local” appears when the offset time data on the ‘Set-up’ menu is entered.

➥“No time data’ appears when no GPS receiver is con- nected and no time data is input manually.

e POSITION INDICATOR

➥Shows the GPS position data.

•“??” may blinks every 2 sec. instead of position data, when the GPS position data is invalid. In such a case, the last position data is held up to 23.5 hours.

➥Shows the manually input position data when no GPS re- ceiver is connected. “MNL” appears instead of “GPS”qat.

•“??” may blink every 2 sec. instead of position data, 4

2