Icom DS-100 instruction manual MB-75

MB-75 9

eUsing the 2 supplied bolts (M5 x 8 mm), attach the clamps on either side of the DS-100 as shown below.

•Make sure that the clamps align parallel to the DS-100’s body.

rTighten the end bolts on the clamps (rotate clockwise) so

that the clamps press firmly

against the inside of the in- strument control panel.

tTighten the locking nuts (ro- tate counterclockwise) so that the DS-100 is securely mounted in position as below.

y Connect the antenna and con- trol cable, then return the in- strument control panel to it’s original place.

27