RECEIVE AND TRANSMIT 5
qPush and hold [MODE] 1sec. to open the squelch.
•Adjust volume to the desired
audio level. (See p. 8)
wSelect a desired operating channel. When a signal is received:
•Squelch opens and audio is emitted from the speaker.
•Further adjustment of [VOL] may be necessary at this point.
•“BUSY” indicator appears on the dis- play.
ePush and hold [PTT] to transmit then speak into the microphone.
•Do not hold the transceiver too close to your mouth or speak too loudly. This may distort the signal.
•The transmit indicator “ 
” appears on the display.
rRelease [PTT] to return to receive.
POWER
UP | MODE |
DOWN |
|
POWER
UP | MODE |
DOWN |
|
IMPORTANT:
To maximize the readability of your transmitted signal, pause a few sec. after pushing [PTT], hold the transceiver 4 to 6 inches (10 to 15 cm) from your mouth and speak at a normal voice level.
NOTE:
The transceiver has an auto power save function to conserve the battery power. The power save function activates automati- cally when no signal is received for 5 sec.
10
