Icom IC-M88 SECTION 5 ADJUSTMENT PROCEDURES, 5-1PREPARATION, ￿SYSTEM REQUIREMENTS, ￿STARTING SOFTWARE ADJUSTMENT, ￿ADJUSTMENT SOFTWARE INSTALLATION

SECTION 5 ADJUSTMENT PROCEDURES

5-1 PREPARATION

When adjusting IC-M88, optional OPC-966 CLONING CABLE, optional RS-232C CABLE and optional CS-M88 adj ADJUSTMENT SOFTWARE are required.

EQUIPMENT	GRADE AND RANGE		EQUIPMENT	GRADE AND RANGE
DC power supply	Output voltage	: 7.2 V DC	FM deviation meter	Frequency range	: 30–300 MHz
	Current capacity	: 3 A or more		Measuring range	: 0 to ±10 kHz
	Measuring range	: 0.1–10 W	Audio generator	Frequency range	: 300–3000 Hz
RF power meter	Frequency range	: 100–300 MHz		Measuring range	: 1–500 mV
(terminated type)	Impedance	: 50 Ω
			Standard signal	Frequency range	: 100–300 MHz
	SWR	: Less than 1.2 : 1
				Output level	: 0.1 µV–32 mV
			generator (SSG)
	Frequency range	: 0.1–300 MHz			(–127 to –17 dBm)
Frequency counter
	Frequency accuracy : ±1 ppm or better
				Power attenuation	: 40 dB or more
	Sensitivity	: 100 mV or better	Attenuator
Digital multimeter	Input impedance	: 10 MΩ/DC or better		Capacity	: 10 W or more

￿SYSTEM REQUIREMENTS

• Microsoft® Windows® 95/98/ME

￿ADJUSTMENT SOFTWARE INSTALLATION

1. Boot up Windows®.

-Quit all applications when Windows® is running.

2.Insert the cloning software CD-ROM into the appropriate CD-ROM drive.

3.Select ‘Run’ from the [Start] menu.

4.Type the setup program name using the full path name, then push the [Enter] key. (For example; D:\ setup)

5.Follow the prompts.

6.Program group ‘CS-M88 ADJ’ appears in the ‘Programs’ folder of the [Start] menu.

￿STARTING SOFTWARE ADJUSTMENT

1.Connect IC-M88 and PC with the optional OPC-966 and the RS-232C cable.

2.Boot up Windows®, and turn the transceiver power ON.

3.Click the program group ‘CS-M88 ADJ’ in the ‘Programs’ folder of the [Start] menu, then CS-M88 ADJ’s window is appeared.

4.Click ‘Connect’ on the CS-M88 ADJ’s window, then appears IC-M88’s up-to-date condition.

5.Set or modify adjustment data as desired.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S.A. and other countries. Screen shots produced with permission from Microsoft Corporation. All other products or brands are registered trademarks or trademarks of their respective holders.

5 - 1