PANEL DESCRIPTION 3

uTRANSMIT POWER/LOCK SWITCH [Hi/Lo• ]

•Selects high, middle or low power when pushed. (p. 9)

•Toggles the lock function ON/OFF when pushed for 1 sec. (p. 10)

iCHANNEL 16 SWITCH [16•9]

•Selects Channel 16 when pushed. (p. 7)

•Selects call channel when pushed for 1 sec. (p. 7)

•Enters call channel write mode when the call channel is selected and this switch is pushed for 3 sec. (p. 10)

oCHANNEL UP/DOWN SWITCHES [Y]/[Z]

•Selects an operating channel. (pgs. 7–9)

•Selects the SET mode condition of the item. (p. 16)

•Selects the SET mode item when pushed with [SQL]. (p. 16)

•Checks tag channels or changes scanning direction dur- ing scan. (p. 13)

!0SQUELCH SWITCH [SQL•MONI]

•Push this switch, then adjust the squelch level with [Y]/[Z]. (p. 11)

•Manually opens the squelch for monitoring the channel while pushed and held. (p. 10)

•While pushing this switch, turn power ON to enter the set mode. (p. 16)

!1PTT SWITCH [PTT]

Push and hold to transmit; release to receive.

■ Function display

3

 

 

q w e

r

t y

 

 

u

 

 

i

 

 

o

!8

 

!0

 

 

!1

!7

!2

 

!6

!3

!4

!5

 

qSIGNAL STRENGTH INDICATOR (pgs. 10, 20)

Shows the relative signal strength while receiving signals.

wTRANSMIT POWER INDICATOR

•“LOW” appears when low power is selected.

•“MID” appears when middle power is selected.

•No indication appears when high power is selected.

eTAG CHANNEL INDICATOR (p. 13) Appears when tag channel is selected.

rSQUELCH LEVEL INDICATOR (p. 11) Show the squelch level.

5