DLCD contrast selection “LC”
The contrast of the LCD can be adjusted from 4 levels.
•1
Push
default | bright |
DAuto power save function “PS”
The auto power save function reduces current drain by deactivating the receiver circuit for preset intervals.
•ON : The power save function is turned ON. The power save func- tion will activate when no signal is received, and no operation is performed for 5 sec.
•OFF: The power save function is turned OFF.
Push
Power save ON (default) | Power save OFF |
SET MODE 8
DSelf check function “SC”
The self check function checks the transceiver conditions by itself, and informs you in case a problem is found. Self check automatically and quickly runs through its diagnostic steps each time the radio is turned ON. Afterwards, the radio switches to normal operation mode.
•Temperature : Outside of
•Connected battery voltage
8
Push
Self check OFF (default) | Self check ON |
When error messages as shown below are displayed, see troubleshooting for advice. (p. 28)
Temperature error | Battery voltage error |
19