DVOX gain “ga”
Adjusts the VOX gain (from 1 to 6) to level when speaking with the optional headset.
•In case of setting to 1, the VOX gain sets to sharpening.
•In case of setting to 6, the VOX gain sets to dulling.
Push
VOX gain 3 (default) | VOX gain 6 |
DVOX delay “dL”
Sets the VOX delay timer (0.5 to 3.0 sec. in 0.5 sec. steps) that keeps on transmitting after you stop speaking.
•In case of setting to 0.5 (0.5 sec.), the VOX delay sets to short.
•In case of setting to 3.0 (3.0 sec.), the VOX delay sets to long.
Push
VOX delay 1.0 (default) | VOX delay 3.0 |
| SET MODE | 8 |
|
| |
SET MODE LIST |
|
|
|
| |
|
|
|
|
|
|
Function | Indication | Switch |
|
|
|
Beep tone function | “bP” | OFF/ON*/US |
|
|
|
Weather alert function | “AL” | OFF*/ON |
|
|
|
Priority scan function | “Pr” | OFF*/ON |
|
|
|
Scan resume timer | “St” | OFF*/ON |
|
|
|
Auto scan function | “AS” | OFF*/ON |
|
|
|
“dt” | Dual*/Tri |
|
|
| |
Monitor switch action | “Sq” | Push*/Hold |
|
|
|
|
| 8 | |||
Backlighting function | “bL” | OFF/1/2/3* |
|
| |
|
|
| |||
LCD contrast selection | “LC” | 1/2/3*/4 |
|
|
|
Auto power save function | “PS” | OFF/ON* |
|
|
|
Self check function | “SC” | OFF*/ON |
|
|
|
Battery voltage indicator | “bt” | OFF*/ON |
|
|
|
Signal strength indicator | “SI” | OFF*/ON |
|
|
|
Squelch sensitivity | “SS” | OFF*/ON |
|
|
|
Scrambler code | “cd” | 1*/2/· · ·/31/32 |
|
|
|
VOX gain | “ga” | 1/2/3*/4/5/6 |
|
|
|
VOX delay | “dL” | 0.5/1.0*/1.5/2.0/2.5/3.0 |
|
| |
|
|
|
|
|
|
*default setting
21