ïCharging connections

qAttach the BC-158 to a flat surface, such as a desk or cabin, etc., if desired.

wConnect the AC adapter as shown below.

eInsert the battery pack with/without the transceiver into the charger.

• The charge indicator lights green.

rCharge the battery pack approx. 12 hours, depending on the remaining power condition.

DO NOT charge BP-225 more than 18 hours. Other- wise, BP-225 will be damaged. BP-225 must be charged for 12–18 hours only.

IC-M90

Turn power OFF

MIC/SP

BP-225

Charge indicator

Lights green when the

BP-225 (with/without

IC-M90) is inserted.

 

Supplied

 

screws

AC adapter

BC-158

BATTERY CHARGING 9

■ Optional battery case

When using a battery case attached to the transceiver, install 6 ⋅ AA(R6) size Alkaline batteries as illustrated below.

q Remove the battery case from the transceiver. w Install 6 ⋅ AA(R6) size Alkaline batteries.

• Be sure to observe the correct polarity.

CAUTION:

• When installing batteries, make sure they are all the

same brand, type and capacity. Also, do not mix new and

 

old batteries together.

 

9

• Keep battery contacts clean. It’s a good idea to clean bat-

 

tery terminals once a week.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

23