8
3
SETTING A FREQUENCY
2
3
■Turning power ON/OFF
➥While receiver ’s power is OFF, push [PWR] to turn power
ON.
•While receiver power is ON, push and hold [PWR] for 1 sec. to
turn power OFF.
■Mode selection
DVFO modes
VFO mode is used for the desired frequency setting within the
frequency coverage.
➥Push [V/MHz•SCAN] to select VFO mode.
What is VFO?
VFO is an abbreviation of Variable Frequency Oscillator . Fre-
quencies for receiving are generated and controlled by the
VFO.
DMemory mode/Weather channels*
Memory mode is used for operation of memory channels
which have programmed frequencies. Weather channels* are
monitored each 5 sec. when the weather alert function is
turned ON.
*Available for USA/CANADA versions only.
qPush [MR•SKIP] to select memory mode.
•“!” indicator appears when memory mode is selected.
➥Or push [MR•SKIP] twice and rotate [DIAL] to select the
Weather channel mode, then push [MR•SKIP] again.
•Memory mode, memory banks or Weather channels can be
selected in sequence.
•If weather channel mode is already selected, and you want to
select memory channel mode. Push [MR•SKIP] and rotate
[DIAL] to select “bAnk --,” then push [MR•SKIP] again.
wRotate [DIAL] to select the desired channel.
•Only programmed memory channels can be selected.
•See (p. 16) for memory programming details.
[DIAL]
[MR•SKIP]
[V/MHz•SCAN]
[PWR]