Icom IC-R1500 Memory bank selection, Transferring bank contents [

23
5MEMORY OPERATION
■Memory bank selection
qPush [MR•SKIP] to select memory mode.
wPush [MR•SKIP] again to enter memory type selection
mode.
eRotate [DIAL] to select the desired bank (A to H, J to R, T,
U, W or Y).
•Only programmed banks are displayed.
rPush any key to set the bank indication.
•Bank’s indicator appears at top of the memory channel.
tRotate [DIAL] to select the contents in the bank.
yTo return to regular memory mode, repeat steps w–rand
select “bAnk --” at step e.
• Memory bank indication
■Transferring bank contents
[
The bank contents of programmed memory channels can be
cleared or transferred to another bank.
INFORMATION: Even if the bank is cleared of memory
channels, the memory channel contents still remain pro-
grammed.
qSelect the desired bank contents to be transferred or
erased from the bank.
➥Push [MR•SKIP] to select memory mode.
➥Push [MR•SKIP] again then rotate [DIAL] to select the
desired memory bank.
➥Push any key to select the bank then rotate [DIAL] to
select the desired contents.
wPush [S.MW•MW] to enter select memory write mode.
•“!” indicator and the memory channel number blink.
[MR•SKIP][DIAL] Bank’s indicator appears
Bank indicator appears
[MR•SKIP][DIAL]