28
6
SCAN OPERATION
6
■Skip scan
DSkip channel/frequency setting
You can set the selected memory channel as a skip channel
which is skipped during memory skip scan. In addition, it can
be set as a skip channel for both memory skip scan and fre-
quency skip scan. These are useful to speed up the scan in-
terval.
qSelect a memory channel.
➥Push [MR•SKIP] to select memory mode, then rotate
[DIAL] to select the desired memory channel to be a
skip channel.
•“!” and memory channel number appear.
wPush and hold [MR•SKIP] for 1 sec. several times to set
the skip condition.
• (no indication) : The channel is scanned during scan.
• ~: The channel is skipped during scan.
•
P
~: The channel is skipped during scan and the pro-
grammed frequency is skipped during VFO scan,
such as programmed scan.
DSkip scan setting [
qPush [SET•LOCK] to enter set mode.
wPush [SET•LOCK] or [S.MW•MW] several times until
“PSC” appears.
eRotate [DIAL] to toggle the skip scan function ON and
OFF.
rPush [TS•MODE] or any key below the display to exit set
mode.
tThen start the scan to activate the skip scan (memory skip
scan or frequency skip scan).
[DIAL]
[S.MW•MW]
[SET•LOCK]
[TS•MODE]
The display shows that
memory channel 16 is
set as a skip channel.
[MR•SKIP]