27
6SCAN OPERATION

■Scan edges programming

Scan edges can be programmed in the same manner as
memory channels. Scan edges are programmed into scan
edges, 0A/0B to 49A/49B, in memory channels.
qPush [V/MHz•SCAN] to select VFO mode.
wSet the edge frequency of the desired frequency range:
➥Set the frequency using [DIAL].
➥Set other data (e.g. tone squelch, etc.), if desired.
ePush [S.MW•MW].
•“!” indicator and channel number blink.
rRotate [DIAL] to select one of scan edge channel, 0A to
49A.
tPush and hold [S.MW•MW] for 1 sec. to program.
•3 beeps sound and VFO mode is automatically selected.
•Scan edge 0B to 49B is automatically selected when continuing
to push [S.MW•MW] after programming.
yTo program a frequency for the other pair of scan edges,
0B to 49B, repeat steps qto r.
•If the same frequency is programmed into a pair of scan edges,
programmed scan will not function.
[EXAMPLE]: Programming 144.000 MHz into scan edge 1A.
Beep
“
Rotate Push for 1 sec. and continue to push

➠

Beep
“
Beep
Beep
Beep
“
“
“
“

“

Push Rotate for setting frequency, etc. Push .