Icom iF22SR Ring Function, Smart-Ring operation see right, Select the Call-Ring melody

4 RING FUNCTION

‘Smart-Ring

The ring function has an answer back feature. This allows you to confirm whether or not a call has reached the member of your group even if the operator is temporarily away from the transceiver.

DSmart-Ring operation (see right)

qSet the same operating channel and CTCSS tone* code for all of

your group transceivers.

wPush [S-Ring/C-Ring] to send the Smart-Ring call.

•When a member of your group station answers your call, then the transceiver emits beep tones for every 30 sec. and TX/RX indicator blinks with an orange color.

•Push [MONI] to cancel the Ringer beep and indication.

•When no answer comes back, the transceiver emits short fail- ure beep tones.

ePush [PTT] to answer the call and to stop the beeps and blink- ing.

*NOTE: This function is available only when the called station has use the same CTCSS tone code and the same operating channels as you.

‘Call-Ring

Sends the pre-selected ring tone to your group members.

DSelect the Call-Ring melody

qWhile pushing and holding [PTT] and [S-Ring/C-Ring], rotate

[VOL] to turn the power ON.

•A sample melody is emitted.

wRotate [CH] to select the ringer melody.

•Push [S-Ring/C-Ring] to monitor the selected melody once

more.

eTurn the power OFF to determine the melody.

19