Icom IM402A, IM402SA instruction manual DSC Operation, Mmsi code programming, Mmsi code check

6 DSC OPERATION

■MMSI code programming

The 9-digit MMSI (Maritime Mobile Service Identity: DSC self ID) code can be programmed at power ON.

This function is not available when the MMSI code has been programmed by the dealer. This code programming can be performed only twice.

qTurn power OFF.

wWhile pushing [DSC•IC], turn power ON to enter MMSI

code programming condition.

eAfter the display appears, release [DSC•IC].

• A cursor starts blinking.

rEdit the specified MMSI code by pushing [Y] or [Z].

•Push [SCAN•TAG] or [CH/WX•DUAL] to move the cursor forward or backward, respectively.

tInput 9-digit code, then push [DSC•IC] to set the code.

• Returns to the normal operation.

■MMSI code check

The 9-digit MMSI (DSC self ID) code can be checked.

qPush [DSC•IC] to enter the DSC menu.

wPush [Y] or [Z] to select “ ” and push [DSC•IC].

eCheck the 9-digit MMSI (DSC self ID) code.

•The MMSI code is displayed and scrolls at the channel comment indicator.

MMSI (DSC self ID) code scrolls

rPush [DSC•IC] to exit the DSC menu.

14