Icom IM402A Lock functions, Activating the Lock function, Activating the All key lock function

11 COMMANDMIC® HM-127

■Call channel programming

qPush [CH/WX• DW U/I/C] several

times while pushing [H/L] to select the desired channel group (USA, INT, CAN) to be programmed.

w Push [16•9] for 1 sec. to select call

■Lock functions

The Lock function electronically locks keys and switches to prevent accidental changes and function access from the mi- crophone.

•All keys, switches and controllers on the transceiver are functional.

DActivating the Lock function

channel of the selected channel group.

• “CALL” and call channel number ap- pear.

e Push [16•9] again for 3 sec. (until a long beep changes to 2 short beeps) to enter call channel pro- gramming condition.

• The channel number and channel

➥While pushing [H/L], push [SQL• MONI L] to turn the Lock function ON or OFF.

•“ ” appears.

•Only [PWR], [PTT], [H/L], [SQL• MONI L], [VOL]+[Y]/[Z] and [SQL]+[Y]/[Z] are func- tional.

Appears when the lock function is in use.

group to be programmed blinks.

r Push [Y]/[Z] to select the desired channel.

t Push [16•9] to program the dis- played channel as call channel.

• The channel number and channel group stop blinking.

DActivating the All key lock function

➥While pushing [H/L], turn the

power ON by pushing [PWR] to turn the All key lock function ON or OFF.

• “ ” blinks.

• Only [PWR] and [PTT] are func- tional.

Blinks when the all lock function is in use.

44