Icom IM402SA Channel/Dualwatch/Tri-Watch Key Ch/Wx Dw U/I/C, SQUELCH/MONITOR/LOCK KEY Sqlmoni L

COMMANDMIC® HM-127 11

r CHANNEL/DUALWATCH/TRI-WATCH KEY [CH/WX• DW U/I/C]

➥Selects and toggles the regular channels and weather channel when pushed momentarily. (pgs. 6, 7, 42)

➥While pushing [H/L], selects one of three channel groups in sequence when pushed. (pgs. 7, 42)

• International, U.S.A. and Canadian channels are available.

➥Starts Dualwatch or Tri-watch when pushed for 1 sec. (pgs. 11, 45)

➥Stops Dualwatch or Tri-watch when either is activated.

t ATTENUATOR/INTERCOM/SCRAMBLER KEY [LO/DX• IC SCR]

➥Activates the Intercom function when pushed for 1 sec. (pgs. 29, 48)

➥Calls the IC-M402A when pushed and held while in In- tercom mode. (pgs. 29, 48)

NOTE: RF attenuator and voice scrambler are not avail- able for IC-M402A.

ySQUELCH/MONITOR/LOCK KEY [SQL•MONI L]

➥[Y]/[Z] sets the squelch threshold level after pushing [SQL]. (p. 43)

➥Push [SQL• MONI L] for 1 sec. to turn the monitor func- tion ON. (p. 45)

➥While pushing [H/L], push [SQL• MONI L] to toggle the (microphone) Key lock function ON or OFF. (p. 44)

•“ T ” appears while (microphone) Key lock function is in use.

•[PWR], [PTT], [VOL], [SQL] and [H/L] still function when the (microphone) Key lock function is turned ON.

➥Advance the cursor while in channel comment pro- gramming condition. (pgs. 10, 48)

u VOLUME/DIMMER KEY [VOL• DIM ]

➥ [Y]/[Z] adjusts the audio level after pushing [VOL]
	11
(p. 43)

➥[Y]/[Z] adjust the brightness of the LCD and key back- light after pushing [VOL• DIM ] for 1 sec. (p. 45)

➥Move the cursor backward while in channel comment programming condition. (pgs. 10, 48)

39