8. When driver install is completed, please click the “Finish” button and restart
your system.
9. After system re-boot, please plug in the MAVIS IM-30/IM-100 cameras and
go to “Device Manager” and make sure you see the “Generic IEEE-1394
digital camera” in the list of “ICP DAS MAVIS”.
10. If your system had install other vendor’s 1394 camera driver, then you may
need to remove it and change to install MAVIS driver by manually.
11. When the installation has been completed, open “EZView” utility for image
acquisition testing, please refer to “4. EZView Utility” for details.
- 32 -