ICP DAS USA SAGP-845EV manual Swap Floppy Drive, Boot Up Floppy Seek, Boot Up NumLock Status

Models: SAGP-845EV

1 62
Download 62 pages 6.25 Kb
Page 36
Image 36
Swap Floppy Drive

Swap Floppy Drive

If the system has two floppy drives, the logical drive name can be swapped.

The choice: Enabled/Disabled.

Boot Up Floppy Seek

zSeeks disk drives during boot up.

zMake this option disabled speeds boot up.

The choice: Enabled/Disabled.

Boot Up NumLock Status

Select power on state for NumLock.

The choice: On/Off.

Gate A20 Option

Select if chipset or keyboard controller should control GateA20.

Normal

A pin in the keyboard controller controls

 

GateA20

Fast

Lets chipset control GateA20

Typematic Rate Setting

Key strokes repeat at a rate determined by the keyboard controller. When enabled, the typematic rate and typematic delay can be selected. The choice: Enabled/Disabled.

Typematic Rate (Chars/Sec)

Sets the number of times a second to repeat a key stroke when the key has been held down.

The choice: 6, 8, 10, 12, 15, 20, 24, 30.

Typematic Delay (Msec)

Sets the delay time after the key is held down before it begins to repeat the keystroke.

The choice: 250, 500, 750, 1000.

36

Page 36
Image 36
ICP DAS USA SAGP-845EV manual Swap Floppy Drive, Boot Up Floppy Seek, Boot Up NumLock Status, Gate A20 Option