![Building In](/images/new-backgrounds/81549/8154933x1.webp)
Building In
SR
SR TC
A
Fig. 4
510
594
A= Auxiliary burner SR=
These hobs can be inserted in a
The hobs dimensions are shown in Fig. 4; the cut out dimensions are shown in Fig. 5.
The edge of the cut out must have a minimum distance from the rear wall of
55mm.
If there are side walls, or sides of the
furniture unit near the hob, the cut out edges must have a minimum distance of 100 mm.
Hanging forniture units or hoods must be placed at 650 mm minimum from the hob.
Fitting the hob to the worktop
Carry out the building in of the hob as follows:
1.Place the seals supplied with the hob on the front edge of the cut out.
Dimensions are given in millimeters
Fig. 5
17