IDEAL INDUSTRIES IZGS 68 ICTX manual Remplacement of the voltage cable

Remplacement of the voltage cable

The connection of the voltage cable to the appliance's terminal block is of type "Y". This means that its replacement requires the specific equipment of a technician. In this case, only cable type H05V2V2-F T90 must be used. The cable section must be suitable to the voltage and the working temperature. The yellow/green earth wire must be approximately 2 cm longer than the phase wires (Fig. 3-a).

To open the terminal block and reach the terminals, proceed as follows:

insert the point of a screwdriver into the visible protrunding part of the terminal block;

exert a light pressure and lift (Fig. 3- b).

WARNING: The supply cable replacement MUST only be carried out by QUALIFIED PERSONNEL.

16

Fig. 3-a

Fig. 3-b

Neutral

Earth

(yellow/green))