Electrical Connection
The appliance is designed to be connected to 230 V monophase electricity supply.
The connection must be carried out in compliance with the laws and regulations in force.
Before the appliance is connected:
1)check that the main fuse and the domestic installation can support the load (see the rating label);
2)check that the power supply is properly earthed in compliance with the current rules;
3)check the socket or the double pole switch used for the electrical connection can be easily reached with the appliance built in the forniture unit.
The appliance is supplied with a connection cable and the relevant plug.
The plug has to be fitted in a proper socket.
If connecting the appliance directly to the electric system, it is necessary that you install a double pole switch between the appliance and the electricity supply, with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current rules.
The connection cable has to be placed in order that, in each part, it cannot reach a temperature higher than 90°C.
The brown coloured phase cable (fitted in the terminal block contact marked with "L") must always be connected to the network phase.
15
