Getting started
Switching from wall installation to desktop
To return the bracket from wall mount position to desktop use, follow the instructions below:
1.Remove the telephone base from the mounting plate. Unplug the telephone line cord from the telephone wall jack and remove the cord from the slots under the telephone base.
2.Lift the handset and place it aside. On the telephone base, pull out the handset tab and rotate it 180 degrees. Replace the handset tab back to the grooves until it clicks into position.
3.Remove the bracket from the base. Hold the telephone base firmly and then slide the bracket downwards as the arrows indicate.
4.Rotate the bracket to the desktop installation position. Push the bracket down as shown below until it clicks into place.
5.Follow steps
11
