AT&T TR1909W, TR1909B user manual Installation preparation

Getting started

Installation preparation

Make sure to install four

AAalkaline batteries (not included) before using the telephone.

See page 6 for easy instructions.

If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.

Your product may be shipped with a protective sticker covering the handset or telephone base display - remove it before use.

For customer service or product information, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.

CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully:

1.Use only four AA alkaline batteries (not included).

2.Dispose of these batteries in a safe manner. Do not burn or puncture. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury.

3.Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

4.Exercise care in handling batteries in order not to create a short circuit. Do not allow conductive materials such as rings, bracelets or keys to touch the battery. The battery or conductor may overheat and cause harm.

5.Use the battery identified for use with this product only in accordance with the instructions and limitations specified in this manual.

6.Observe proper polarity orientation between the battery and metallic contacts.

7.Do not disassemble your telephone. There are no serviceable parts inside. Refer to qualified service personnel for servicing.