IFB Appliances Elite 5 KG manual Fabric Conditioner, Programme Selection, Treatment Of Stains

Symbols On Dd Tray

I Pre - Wash

II Main Wash

Additive

II I

Fabric Conditioner

Fabric softner, Whitening, Enzyme, Disinfectants, bleaching, etc. qFill in the middle chamber of detergent dispenser tray marked qConditioner should be in liquid/solution form only (powders to

be mixed in water.)

qFabric softner gives a soft feel and smooth surface to fabrics. qWhitener gives ‘Whitness’ to white clothes and brightness to

coloured clothes.

Programme Selection

1.Cotton wash programmes (Linen)

Stage i : Pre - Wash -

qThis cycle takes place before the main wash. qTo be used for heavily soiled clothes, which are given a

preliminary wash.

qDetergent to be filled in compartment l (extreme right ). qAt the end of this pre-wash the dirty water is pumped out

automatically.

qIN CASE CLOTHES ARE NOT HEAVILY SOILED, THE “PRE-

WASH” CAN BE AVOIDED BY SETTING THE PROGRAMME SELECTOR KNOB TO ANY OF THE MAIN WASH P R O G R A M M E S A S G I V E N B E L O W A N D DETERGENT FILLED ONLY IN THE MAIN WASH CHAMBER MARKED ll (EXTREME LEFT)

Stage Il: Main Wash - Normal / Light / Quick

qMain wash starts with detergent being drawn from the extreme left compartment of the detergent dispenser tray.

qClothes are soaked for 10 minutes.

qIF CLOTHES ARE NOR VERY DIRTY, THE MAIN WASH CAN BE STARTED BY DIRECTLY SETTING THE PROGRAMME SELECTOR KNOB AT LIGHT/QUICK TO REDUCE WASHING TIME & ENERGY CONSUMPTION

qMain wash is completed with Intermittent short spin of 600 rpm max.

qEnzymes help to remove stains of sweat, blood etc. qChlorine bleach is used for whites clothes and oxygen bleach

is used for coloured clothes.

qA strong bleaching agent is not recommended for direct use in the washing machine.

qExtremely dirty areas in cloths can be pretreated with bleach and then be loaded in the machine for a regular wash.

Treatment Of Stains

qStains need to be treated immediately when they are fresh. Usually stains are categorised as absorbed stains, built-up stains, and compound stains.

qAbsorbed stains can be removed by rubbing gently a pad containing a suitable solvent over the stain from outer edge towards centre by keeping stained cloth on absorbent fabric.

qBuilt up and compound stains may be removed by first carefully brushing off stained area. Then rub gently with a pad containing solvent from the back of fabric.

qIt is advisable to try out the solvent on hidden part of the garment to verify its effect on cloth.

18 27