iHome iD99 manual Power Docking your IPad/iPhone/iPod, Setting Clock with AutoSync Radio

quick start

1: power		2: docking your
		iPad/iPhone/iPod
	RESET
	RESET
	TEST	Dock 1	Dock 2
	TEST

Attach AC adaptor cable to DC jack on back of the unit and plug the other end into a wall socket. Remove pull tab from the backup battery compartment on the bottom of the unit.

Dock 1: Select the insert for your iPhone or iPod and place in Dock 1. Gently dock your iPhone or iPod. You can safely dock your iPhone or iPod without an insert provided you use care.

Dock 2: Gently dock your iPad, iPhone or iPod onto the flexible 30 pin dock on Dock

2.The devices docked in Dock 1 and Dock 2 will charge while docked. Press the Dock 1 or Dock 2 Button on the unit to play your iPad, iPhone or iPod.

NOTE: Inserts provide the best stability for your iPhone or iPod. If you do not have an insert for your iPhone/iPod, you can safely dock it provided you always do so gently and carefully. To purchase an insert visit www.ihomeaudio.com or call iHome toll free at 1-877-446-6301 to purchase one.

Use this insert	iPod touch 2G	iPhone 4	nano 6G/touch 4G
	insert 16	insert 19	insert 20
For this iPhone / iPod iPod touch 2G/3G		iPhone 4	nano 6G
			iPod touch 4G

3: Setting Clock with AutoSync 4: Radio

Dock your iPad, iPhone or iPod (see step 2). The unit will

attempt to autosync to the time on your iPad, iPhone or iPod.

This process takes about 3 seconds.

Press and release the Mode Button as needed to select FM band. Press and release the + or - Button to tune in a station.

See page 5 for programming presets.

2